Floorheat NZ
Finished bathroom with a tiled floor, freestanding bath and wall-mounted thermostat
100% Kiwi owned and operated, New Zealand

Underfloor / Under Tile Heating, Auckland.

Step onto warm tiles every morning. We supply and install electric heating under your floor, anywhere in Auckland.

Bathrooms start from $800 +GST. Price your room now

Get a free quote

No obligation. We usually reply within one working day. Or call 027 549 8966

Google rating
5.0Google rating
Years' experience in the trade
25+Years' experience in the trade
Manufacturer warranty on the cable
25-yearManufacturer warranty on the cable

What we do

Electric underfloor heating, supplied and installed

Floorheat NZ installs electric underfloor heating for homes across Auckland — bathrooms, kitchens, living areas, renovations and new builds. Warm, even, energy-efficient floors all year round.

Under-tile heating, heating cables, heating mats and smart thermostats, supplied and fitted by one team. Whether you're redoing a bathroom, building new or upgrading what you have, you get honest advice and a price before anyone turns up.

Installer floating a concrete screed over an electric underfloor heating cable installation

Testimonials

What customers say

“Byron was a pleasure to deal with. Turned up when he said he would, and left the job cleaner than when he arrived - great quality work & fair price.”
SM

Sean Molloy

Google review

“I found the team at Floorheat to be professional and super easy to deal with throughout the process. Communication was clear, the work was completed to a high standard. I am very happy with the system that was installed - great to have warm tiles all year round!”
RC

Rajeev Chand

Google review

“Great communication from the team, punctual arrival onsite, and a tidy install. Suggested going into the walk-in shower, which I definitely wouldn't have considered myself. Looking forward to warm feet!”
P

Phil

Google review

Get your instant estimate

Enter the floor area of each room you want heated and see an all-in price in seconds. No phone call, no waiting.

Get an instant estimate

Enter the heated floor area of each room.

m²

Your estimate

Enter a room size above to see your estimate.

Every price is all-in — it includes:

  • Electric heating cable
  • Floor levelling screed
  • Smart thermostat
  • Install & commissioning
  • Electrical Code of Compliance certificate

Bring your price down

This is the full rate. Tick everything that applies — each one knocks money off, down to our keenest price.

Full price$0
Your price$0 +GST ($0 incl.)
T&C apply

Our services

Professional underfloor heating solutions

We specialise in electric underfloor heating across Auckland — renovations, new builds, and everything in between.

⚡

Electric underfloor heating

Perfect for bathrooms, kitchens, and renovations. Fast installation, precise room-by-room control, minimal floor height increase.

  • ✓Custom quote for your floor plan
  • ✓Individual room control
  • ✓Smart thermostat compatible
🛁

Electric under-tile heating

Ideal for bathrooms, ensuites, and other wet areas. Heating cable installed directly beneath tiles for a warm floor underfoot.

  • ✓Purpose-built for wet areas
  • ✓Works with all tile types
  • ✓Energy-efficient zone heating
🏠

Living areas & new builds

Multi-zone electric systems for living areas, bedrooms, and open-plan spaces — installed during a build or retrofitted into a renovation.

  • ✓Multi-room zoning
  • ✓New builds & renovations
  • ✓Programmable thermostats

25 years of experience on every job

Floorheat NZ is led by an installer with more than 25 years of hands-on experience in electric underfloor heating. We supply and install heating for homeowners, renovators and builders across Auckland, with clear pricing and tidy, reliable workmanship.

Illustration of an underfloor heating cable layout shaped like a house roofline

Frequently asked questions

How much does electric underfloor heating cost in Auckland?+

A small bathroom up to 3m² is $800–$1,015 +GST supplied and installed, and a standard 4–6m² bathroom is $890–$1,360 +GST. The price varies site by site and job by job. Travel is included anywhere in Auckland, so the price is the same in Titirangi as it is in Pukekohe. Adding a second room in the same visit brings the per-room cost down. Use the instant estimate tool above for your exact rooms and we'll confirm it on site.

See the full Auckland price list →

How much does electric underfloor heating cost to run?+

About 27 cents an hour for a 4m² bathroom — roughly $16–$26 a month if you run it 2–3 hours a day on a timer. That is 170W/m² (0.68kW for 4m²) at the 39.3c/kWh national average power price. Real-world cost is usually lower, because the floor sensor cuts the cable off once the floor reaches temperature and only cycles it back on to hold it there. The cost only gets high if you leave it running 24/7 instead of on a schedule.

More on what it costs to run →

How long does electric underfloor heating take to warm up?+

20–30 minutes to reach a comfortable floor temperature from cold. That is why we set it on a timer to come on before you get up, rather than switching it on when you walk into the room. A tiled floor over concrete takes a little longer than one over timber, because the concrete has more mass to heat.

Can electric underfloor heating go under my existing floor?+

Yes — but the existing floor covering has to come up first, because the cable sits under the tile, not over it. Tile or stone over a concrete slab is the simplest and cheapest. Timber, vinyl and carpet are all possible with a self-levelling compound over the cable. The cable and the compound over it add 4–6mm max to your floor height, so door clearances and floor transitions rarely need altering. This is why underfloor heating is cheapest during a renovation or a re-tile: the floor is already coming up, so you are only paying for the heating, not for lifting the floor twice.

How long does installation take?+

One day for a single bathroom or small room. Larger areas and full renovations take longer and we give you a firm timeframe with your quote. One thing to plan for: the cable goes in before the tiler, and the heating cannot be switched on until the tile adhesive has fully cured — a minimum of 7 days — so allow about a week between install day and the first time you feel the floor warm.

What warranty comes with the heating?+

A 25-year manufacturer warranty on the heating cable we install, and 3 years on the thermostat — the thermostat cover is a replacement unit, and fitting it is not included. The warranty covers manufacturing defects, applies to the first owner and cannot be transferred, and needs proof of purchase. Damage from an electrical surge or a lightning strike is not covered. One practical thing to keep: hold on to at least four spare tiles, because a cable repair means lifting a tile to reach it. Your rights under the Consumer Guarantees Act 1993 apply on top of this.

Do you install in new builds and renovations?+

Both — and most of our Auckland work is renovations, retrofitted before new tiling goes down. New builds are the simplest job, because the heating goes in while the slab and the floor are already open. For a renovation, the right moment to call us is after the old floor is out and before the tiler starts.

Can the heating go in after the waterproofing?+

Yes. If the waterproofing is already down we can still lay the heating cable over it. We would rather do it the other way round though, with the cable down first and the waterproofing going over the top, then tiling. Tell us where the job is up to and we will work in either way.

What areas of Auckland do you cover?+

All of Auckland — 116 suburbs across Central Auckland, the North Shore, West Auckland, East Auckland and South Auckland, from Orewa down to Pukekohe. Prices are the same everywhere and travel is included, so there is no extra charge for reaching you. Use the 'See all suburbs we cover' button at the bottom of any page to check yours.

Electric or hydronic underfloor heating — which should I choose?+

Electric, for almost any single room or renovation — and hydronic only for a whole-home new build with a fresh concrete slab. Electric cable is thinner, goes in in a day, needs no boiler, pump or pipework, and costs a fraction to install. Hydronic is cheaper per kilowatt to run across a whole house, which is why it makes sense at whole-home scale and almost never for one bathroom. We install electric only.

Is electric underfloor heating worth it?+

For a tiled bathroom, kitchen or living area, yes — it removes the cold-floor problem completely for about $16–$26 a month on a timer, and it is invisible: no wall unit, no vents, no noise. It is most worth it when the floor is already coming up for a renovation or a re-tile, because the install cost is at its lowest then. The honest version: it is a floor-warming system, so in a small well-insulated bathroom it is all the heating you need, while in a big open living room treat it as comfort underfoot rather than your only heat source.

Get a free, no-obligation quote

Chat with us now — tell us about your project and we'll get back to you, usually within a day.

or

Prefer email? Reach us directly at info@floorheat.nz