Bathrooms
Bathroom underfloor heating, Auckland
Electric underfloor heating for an Auckland bathroom costs $800–$1,015 +GST for a small bathroom or ensuite up to 3m², and $890–$1,360 +GST for a standard 4–6m² bathroom, supplied and installed.
The bathroom is the room we are asked for most, and it is the room that needs it most. Tile is the coldest floor in the house, and stepping onto it on a winter morning is what makes people pick up the phone. The heating cable goes in under the tile, across the open floor where you actually stand, with a smart thermostat on the wall and a 7-day timer that brings the floor up to temperature before you are out of bed.

Bathroom prices
Supplied and installed, one bathroom, GST excluded.
| Bathroom | Floor area | Installed price |
|---|---|---|
| Small bathroom or ensuite | up to 3m² | $800–$1,015 |
| Standard bathroom | 4m² | $890–$1,130 |
| Large bathroom | 6m² | $1,070–$1,360 |
These are indicative prices only, not a quote. Every price on this page excludes GST. The price varies site by site and job by job. Your own price depends on your floor, your subfloor and the size of the area. For an actual price, send us your room sizes or give us a call and we will confirm it.
What a bathroom install includes
- • The heating cable, laid out and fixed across your floor
- • The levelling screed over it, left flat for the tiler
- • A smart touch-screen thermostat with a 7-day timer
- • Install, commissioning and a walk-through of the controls
- • Travel anywhere in Auckland
- • 25-year manufacturer warranty on the cable
What the work looks like




When to call us during a bathroom renovation
After the old floor is out and before the tiler starts. The cable sits under the tile, so the floor covering has to come up either way — if your bathroom is already being stripped, you are only paying for the heating and not for lifting the floor twice. We need the room clear, we are in and out in a day, and the tiler follows us once the levelling compound has gone off.
Common bathroom questions
How much does underfloor heating cost in a bathroom?+
A small bathroom or ensuite up to 3m² is $800–$1,015 +GST supplied and installed. A standard 4m² bathroom is $890–$1,130 +GST and a large 6m² bathroom is $1,070–$1,360 +GST. That is the installed total, not a per-square-metre rate. Travel is included anywhere in Auckland.
When in a bathroom renovation does the heating go in?+
After the old floor is out and before the tiler starts. We need the floor clear and the room empty of fittings. If your bathroom is already being stripped for a renovation, the floor is coming up anyway — that is the cheapest time there is to add heating, because you are only paying for the heating and not for lifting the floor twice.
Can underfloor heating go in after the waterproofing?+
Yes, it can. We would rather do it the other way round though — heating first, waterproofing over the top — and that is what we recommend if the bathroom has not got that far yet. If yours is already waterproofed, say so when you call and we will work to that.
Does the heating go under the bath, shower and vanity?+
The bath, the vanity and the toilet, no — the cable goes across the open floor where you actually stand. The shower we can heat if you want it, with one condition: the shower has to sit on top of the finished tile and be siliconed in, not screwed or fixed down through the floor, because anything fixed down through the floor will damage the cable. Tell us before we set the floor out so we plan the cable for it. Either way the cable runs right up to the doorway, so there is no cold strip as you walk in.
How much will it raise my bathroom floor?+
4–6mm at most — the cable plus the levelling screed over it. Door clearances and the step out to the hallway almost never need altering.
What does a bathroom install include?+
The heating cable, the levelling screed over it, a smart touch-screen thermostat, and the install and commissioning. We set the thermostat up and show you how to use it before we leave. Floor prep such as grinding or extra levelling on an uneven subfloor is quoted separately.
How long does a bathroom take?+
A bathroom is a one-day job for us in nearly every case. The tiler can start once the levelling compound has gone off. The heating itself stays off until the tile adhesive has fully cured.
What does it cost to run a bathroom floor?+
Roughly $16–$26 a month, or about $5 a week, for a 4m² bathroom on a timer for a few hours a day. It only gets expensive if you leave it on around the clock instead of on a schedule.
Will it work under my tiles?+
Yes. Tile and stone are the best floors for it — they conduct the heat well and hold it. Electric under-tile heating is what we install, and a bathroom is the most common room we do it in.
Get a price for your bathroom
Tell us roughly how big the room is and we will come back with a price. No obligation, and we usually reply within one working day.
